Questions? Email Debi or Call Toll FREE (888)840-9181  
PTG41 Purple Metallic

PTG41 Purple Metallic

800 meter spool
Quantity in Basket:  None
Code:  PTG41
MSRP: $21.99
Our Price:  $19.99

Shipping Weight:  0.10 pounds


Floriani Metallic Thread

Many embroiderers will not attempt to use Metallic Thread. They have been frustrated time and time again with broken threads, broken needles and ruined garments. Finally, Floriani has introduced the perfect metallic embroidery thread designed to be used at high speeds on most machines. The Floriani Premium Metallic Threads are created with a very strong inner core made of polyester. The polyester core is coated with brilliant metallic colors but then it is coated with a special lubricating hardener to prevent the metal from flaking. This special lubricant also allows the Floriani Metallic Thread to flow evenly and without restriction through your machine. Most metallic thread manufacturers will advise users to replace their machine needle with a large eye needle before using their metallic thread, but with Floriani Premium Metallic Thread this is not necessary. Use the same needle as used for regular polyester or rayon threads.

Here are a few hints to help make sure your embroidery with Floriani Metallic Threads give you the results you deserve.

  1. Make sure the design you wish to embroider was digitized for metallic thread. You may experience thread breaks if it was not.
  2. Avoid using metallic thread for extremely detailed or dense embroidery such as small lettering.
  3. Most machines will run metallic thread best with less than normal tension settings.
  4. Choose the proper Floriani stabilizer for your weight of fabric and keep in mind metallic threads look their best when embroidered on soft fabrics that are not coarse.
  5. Some machines may need to run metallic threads at a slower speed.
  6. Be sure to use a fine bobbin thread if possible.