Free Ground Shipping On All Orders over $175 United States Only (excluding AK, HI)
Sign In About Us Contact Us Frequent Questions
888-840-9181
0
Product Search
    0
    Secure Checkout
    Floriani's Heat N Gone (Disappears with heat)

    Thumbnail Filmstrip of Floriani's Heat N Gone (Disappears with heat) Images

      Purchase Floriani's Heat N Gone (Disappears with heat)

      PRODUCT CODE: FHG2010 Floriani's Heat N Gone (Disappears with heat)

      $18.99
      20" x 10 yds
      Shipping Weight: 0.80 pounds
      Quantity in Basket:  None
       

      Floriani Heat N Gone

      Heat Removable Topping and Stabilizer

      Use this clear, 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260° - 300° F (120°-140° C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture.

      • Clear and Easy to see through
      • Easy to remove
      • Embossed backside prevents curling and shifting
      • Perfect for fabrics that can't be wet such as velvet, wool, satin, etc.
      • Trace intricate quilt patterns onto Heat N Gone® for an easy guide when free motion quilting or thread painting.
      • Prevents loops from sneaking back through on high pile fabrics such as towels and terry cloth.

      To use as a topping:

      1. Place a piece of Heat N Gone® on the surface of the hooped item, bumpy side touching the fabric, and secure the outer corners with pins or tape to prevent curling.
      2. Complete the embroidery design.
      3. Tear away as much of the Heat N Gone® as possible.
      4. Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260° F (120°C). This temperature should be similar to a high wool setting on most household irons.
        **Stainless Steel Iron recommended for best results.

      To use as a stabilizer:

      1. Place a piece of Heat N Gone® within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
      2. Embroider the design.
      3. Tear away as much of the Heat N Gone® as possible.
        Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260°F (120°C). This temperature should be similar to a high wool setting on most household irons.

      *To clean your iron of any residue, heat the iron up to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work also.

      Product Identity

      FHG10 10” x 10yds
      FHG25 10” x 25 yds
      FHG2010 20” x 10 yds
      FHG10100 10” x 100 yds