Free Ground Shipping On All Orders over $175 United States Only (excluding AK, HI)
Secure Checkout
Floriani's Beige No Show Fusible Mesh 1.5 oz

Thumbnail Filmstrip of Floriani's Beige No Show Fusible Mesh 1.5 oz Images

    Purchase Floriani's Beige No Show Fusible Mesh 1.5 oz

    PRODUCT CODE: FMFBE2010 Floriani's Beige No Show Fusible Mesh 1.5 oz

    $34.99
    20" x 10 yds
    Shipping Weight: 0.90 pounds
    Quantity in Basket:  None
     

    Floriani No Show Nylon Mesh Fusible

    "No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market.

    Floriani No Show Nylon Mesh Fusible is a 1.5 oz sheer cutaway available in black, white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments. The uniqueness of the fusible version makes this product a staple in your embroidery stabilizers. There is no need for basting or messy spray adhesives which leave a residue on the needle and machine when using this product.

    By fusing the stabilizer to the back of the garment, we are more successful in hooping and do not stretch the garment out of shape. The stabilizer is temporarily attached to the entire area where the embroidery will be stitched unlike spray adhesives which only "spot" tack and allow shifting of the fabric. This product is also available in a non-fusible version.

    • Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").
    • Use the fusible version to cover up scratchy stitches on the back of the embroidery.
    • Will not shadow through on light weight cottons and knits

    To use Floriani No show Nylon Mesh Fusible:

    1. Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.
    2. Fuse the entire piece of the stabilizer on to the back of the garment using a low to medium temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the fabric, not the stabilizer.
    3. Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design
    4. Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
    5. After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.

      *Tip! If embroidering knit, don't forget to use topping!

      *Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.
    Did you know that your Floriani No Show Nylon Mesh is a great way to create free standing embroidery designs that you can adhere or appliqué to any surface? Think of the possibilities! Now you can have your beautiful embroideries on the most delicate fabrics or the oddest or most difficult foundations! Click on the link below to check out the projects page for this exciting technique.

    Floriani's No Show Mesh Fusible Product Identity

    White
    FMFWH1210 12" x 10 yds 1.5 oz
    FMFWH2010 20 " x 10 yds 1.5 oz
    FMFWH15100 15" x 100 yds 1.5 oz

    Beige
    FMBE1210 12" x 10 yds 1.5 oz
    FMBE2010 20 " x 10 yds 1.5 oz
    FMBE15100 15" x 100 yds 1.5 oz
    FMFBE8X8 8" x 8" Pre-Cut - 500 pieces

    Black
    FMFBL1210 12" x 10 yds 1.5 oz